Point To Point Wireless Ethernet Bridge

By | August 6, 2022

Typical PTP Wireless Bridge Scenerio with directional antennas:


PTP Wireless Ethernet:

GNS Wireless offers complete Signal-to-Betoken Wireless Ethernet Span packages to include
EVERYTHING
you need to connect two or more locations together wirelessly.  From basic, residential grade solutions, to high speed, high reliability, total duplex solutions, we offer plough-central, pre-packaged solutions to come across the needs of your specific application.  These wireless to Ethernet bridges, or point to point wireless backhauls will enable y’all to share Internet between ii or more locations, share files, video, voice or other data beyond your network. Our building to building wireless bridge packages offer 802.11N speeds to create a building to edifice link, or wireless broadband connectedness between your two locations. For applications where trees, or other obstructions are in the way, nosotros offer Not Line of Sight (NLOS) wireless bridge packages.  The following point to point wireless solutions are pre-packaged, unlicensed packages.



WIRELESS Span FOR LINE OF SIGHT

This the most common blazon of scenario, where your two locations are less then ane mile apart, take clear, unobstructed, line of sight, from building to building, and just demand the basics.  Line of sight means no trees, or other obstacles are in the fashion.  These wireless span kits can be used for anything from sharing Cyberspace between two locations to sharing vox, video, files, or other data.  Typically these wireless bridge packages use the 802.11A/N, 5GHz Frequency.  These are basic, brusk range 5 GHz wireless Ethernet bridges, similar the new GNS-1173AC, and are used to connect ii homes or offices, share Internet or provide a temporary data link for any two locations at a short distance apart. These packages include the most cost effective wireless span devices that are pocket-size in size, to long distance wireless span packages.  We stock wireless N bridge, AC Wi-Fi bridge, and wired to wireless bridge equipment.  Setting up a wireless span is quick and easy as all of these pre-packaged point to point Ethernet bridges transport pre-configured for plug-n-play functioning.

  • 500Mbps Ac PTP Wireless

  • Ability Over Ethernet

  • twenty dBi Integrated Panel Antenna

  • 1/2 to i Mile Range


Part#



GNS-1153AC

Price:

$499.95

  • 500Mbps 802.11AC PTP

  • Ability Over Ethernet

  • xv dBi Integrated Panel Antenna

  • 1/4 Mile Range


Function#

GNS-1163AC

Price:

$377.49

Click here for pre-packaged, line of sight wireless bridge kits.
Click here for the cheapest wireless Ethernet bridge



► NON LINE OF SIGHT WIRELESS Span





GNS Wireless recommends the 900 MHz frequency to penetrate copse, and found a secure reliable connection between your 2 locations when you do not have articulate, unobstructed line of sight.  Please note, that maximum distance is typically restricted to 1/4 mile or less when 100% trees are in the manner.

For this type of application, we recommend your ii locations to exist less then one/4, or even 1/two mile apart because when copse cake the bulk of the betoken path you are going to have a lot of indicate loss, resulting in slower throughput.  Using 900MHz antennas, and high power, 900MHz radios, you volition be able to penetrate the trees, allowing you lot to establish a reliable connection betwixt your two locations, but speed will vary.  The exact altitude of your link, and how dense the trees are betwixt the ii sites will make up one’s mind the verbal speed of your wireless bridge.  These 900MHz signal to betoken wireless span kits range from 10Mbps to 150Mbps.  For example, a 1000ft. PTP wireless link, with 50% copse blocking the path, using the GNS-1130N, will yeild near a xxx Mbps throughput.  Using a plug-n-play package like the 1130N to replace the older linksys wireless routers to connect your two locations will provide a much faster throughput.  The 900MHz antennas volition get meliorate range, increased reliability, and faster speed.  Setting up a 900MHz wireless span is easy to do, as the antennas include external LED’s for alignment assistance.

  • 150Mbps 802.11N Wi-Fi

  • Ability Over Ethernet

  • Outdoor Dish Antennas for NLOS

  • Connect through trees


Part#



GNS-1130N

Price:

$599.95

Click hither for pre-packaged, non line of sight wireless bridge kits.
Click here for Cambium PTP650L – Non line of sight broadband solutions.
Click here for Radwin Rural connectivity solutions.



► COMMERCIAL Grade PTP WIRELESS SOLUTIONS





For the commercial grade, or industrial grade requirements, GNS Wireless stocks enterprise level bespeak to point wireless Ethernet bridge packages.  These signal to indicate links provide higher package per 2nd processing, (PPS), high reliability, high speed, and enclosed inside ruggized outdoor weatherproof boxes for the near extreme conditions.  Typically these indicate-to-point links provide wireless connectivity betwixt locations that are handling voice/video, or large amounts of data.  They tin also be used for temporary fiber replacement, or final mile betoken to point connectivity.   Throughput volition vary based on distance, and antenna blazon.  Typical scenerio for a full duplex point to point link will be where a customer has a very large corporeality of VoIP phones and/or data going across a link, where minimum latency and minimum downtime is required.  The wireless span setup on full duplex GNS packages are just every bit fast and piece of cake to install every bit the smaller kits.  These long-altitude point to indicate wireless solutions will still include external LEDs for alignment assistance and also will allow you to log into the web based configuration for fine tuning and adjustments.

Popular:   The Best Multiroom Wireless Speaker System for 2022 | Reviews by Wirecutter

  • 500Mbps 802.11AC Carrier Form PTP

  • Full Duplex | 60K PPS

  • 23dBi Integrated Panel Antennas

  • Gigabit POE


Part#



GNS-1155AC

Price:

$1089

  • 866Mbps 802.11AC Enterprise PTP

  • Full Duplex | 200K PPS

  • 23dBi Integrated Console Antennas

  • Gigabit POE + QOS + VLAN


Part#

GNS-PTP-5RF

Cost:

$2490

Click here for pre-packaged, commercial form, full duplex wireless span kits.


► Loftier SECURITY POINT TO Point WIRELESS Span


For the regime, military, or other public apply sector which requires high security, encrypted, wireless backhauls, GNS Wireless offers bespeak to bespeak wireless solutions from Cambium, Radwin Wireless, Proxim and Bridgewave.  These high end point to point wireless data links offering the highest security options including FIPS 140-2, and both 128bit, and 256bit encryption.  For public safety use simply, we conduct a wide range of four.9GHz betoken to betoken wireless bridge packages.  Throughput requirements vary based on your exact indicate to bespeak distance, obstructions, and frequency range.  We offer both unlicensed point to point wireless span kit packages, as well as licensed frequency bands for when you are linking two locations in a high interference envirnment.  Gigabit wifi is available for distances less so 5 miles.  High security mesh networks can be installed at remote locations and information can be passed over the long distance wireless n bridge.

Click here for Cambium PTP650 Point to Point Wireless
Click hither for Mimosa Gigabit RF Wireless Bridge
Click hither for Ubiquiti airFiber Wireless Bridge


► LICENSED PTP WIRELESS ETHERNET BRIDGES





For building to edifice wireless solutions where the highest security is required, the licensed band of point-to-betoken applications is recommended.  Licensed indicate to indicate backhauls will provide the almost successful, highly reliable, interference-gratis network connexion between two locations.  We offering brusk range point to point wireless solutions to long range betoken to point backhauls upwards to 30 miles.  GNS Wireless now stocks licensed point to point radios from meridian manufactures such as Cambium, Proxim, Siklu and Bridgewave.  Setting up a wireless span in the licensed ring of broadband backhauls is the aforementioned every bit the unlicensed band, except that when registering the link with the FCC, you enter the type of frequency beingness used.  For public safety, 4.9GHz is used.  Mesh networks can be utilized in the licensed ring for the wireless backhaul, and 2.4GHz can be used for the wifi network, wifi extender, wifi signal booster, or wireless mesh range extenders.

Click hither for pre-packaged, licensed, signal to point solutions.


LONG DISTANCE Indicate-TO-POINT WIRELESS Bridge


For any awarding where your two locations are greater then 3 miles autonomously, it is recommended to email our support section your lat/long, or GPS cordinates of the two locations.  This will let usa to run a quick, path analysis to determine if a link is possible between your 2 locations, and what antenna acme is recommended.  For point to betoken wireless greater than 3 miles, clear, unobstructed, line of sight is required.  If you are sure your ii locations have line of sight, and so the typical scenerio of point to bespeak wireless utilizes anywhere from a 2ft. to 6ft. dish antenna, attached to your high power, outdoor backhaul radio.  View some of our pre-packaged, long range wireless bridge kit packages below using both 2ft. and 3ft. dish antennas.

Click here for long range, line of sight ptp wireless bridge kits.


BRIDGEWAVE POINT-TO-Signal WIRELESS SOLUTION FOR EDUCATION


BridgeWave Communications produces ultra depression cost gigabit speed wireless solutions from design to manufacturing, enabled by BridgeWave adult transceiver and modem technologies. BridgeWave solutions use high-frequency radio spectrum in the 60-ninety GHz range, now being allocated by the FCC, enabling multi-gigabit per 2d wireless connectivity for point to point reliability over long altitude.  Click here for more information.


BRIDGEWAVE POINT-TO-Point SOLUTION FOR HEALTHCARE ORGANIZATIONS


BridgeWave Communications produces ultra low cost gigabit speed wireless solutions from design to manufacturing, enabled by BridgeWave developed transceiver and modem technologies. BridgeWave solutions utilize high-frequency radio spectrum in the 60-ninety GHz range, now being allocated by the FCC, enabling multi-gigabit per second wireless connectivity.  Bridgewave gigabit wireless solutions can supersede T1, provide for higher throughput of greater than 700Mbps, and are HIPAA compliant.  Click here for more than information.

Popular:   Which Is Best Professional Camera For Photography


CAMBIUM NETWORKS iv.9GHz PTP WIRELESS BACKHAUL SOLUTIONS


Cambium’southward PTP 49400 Wireless Backhaul Solution is platonic for: Replacing T1 Links, Backhauling Video Surveillance Cameras on 4.9GHz, Connecting Remote Locations (public prophylactic locations not easily reachable via wired connections), Backhauling a 4.9GHz MOTOMESH hot-spot or coverage network.  4.9GHz point to point wireless networks are too useful in loftier interference environments where loftier speed over the wireless backhaul is required.  Click here for more data on Cambium Networks 4.9GHz solutions.


WIRELESS Bridge SETUP Application SCENARIOS:

QUESTION1:

The information provided on your spider web site has been very valuable.  I’m looking for some practiced advice on how best to reliably and costs finer extend my homes wireless network to an unattached building on my belongings, and how to setup a wireless span. The metal building sits nearly 75’ away from my main residence, with about xv’ of elevation alter (eastward.g. slightly up a loma). There are no LOS obstructions and since I live in a very rural surface area, other wireless traffic is mostly not-real. I currently use 2 Linksys WRE54G extenders to provide access to the detached building, but the connection does not provide the reliability that I crave.
For my home network I currently use a Linksys WRT600N router which manages connectivity very well for about a dozen wireless G and Northward devices. I currently run WPA-Personal with AES and TKIP encryption, with the N traffic on the dedicated 5 GHz band and 1000 traffic on two.4 GHz. I have a Linksys WET200 wireless span to provide connectivity for some of my home entertainment gear.
My wife has a Mac Book Pro with built in Wireless-N network adapter and our children have notebooks with Wireless-Grand adapters.  My preference would be to preserve the wireless adequacy within the classroom. Based upon what I’ve read on your site there are a number of solutions such as WAP with directional antennas or fifty-fifty wireless point to bespeak bridge.  I’g looking to brand a purchase and perform the installation immediately and would appreciate whatsoever recommendations for a cost effective and reliable solution.

ANSWER1:
What you need is a cost constructive betoken to point bridge to connect the ii locations.  This will allow you lot to have a dissever wireless router within the remote building, which can be used for local access to the laptops in that building.  The part number is GNS-1151N,  which includes everything you need to connect the two locations.  At the principal location, you will connect the radio to the LAN port on your wireless N router.  On the remote edifice you volition connect the radio/antenna to the WAN port on your remote wireless router, (routers not included.).  The radios should be mounted outside, and pointed at each other.  They are housed in a weather proof enclosure, with a small form factor of 6″ x 4″ square.  The wireless span comes pre-configured, and then all you have to do is mount them and power upwards.

—————————————————————————————————–
QUESTION2:

I have a customer that needs to connect their network to a building almost 300ft abroad. I was looking at the wireless kit, Part # GNS-1141.  Is this the to the lowest degree expensive solution yous offer for share a internet indicate between two locations, or to connect line of sight internet at 300ft.?

ANSWER2:

The most toll effective solution to bridge two buildings at 300ft, with articulate line of sight, is the GNS-1162N,.  This volition include everything you need to connect the locations.  The radios are outdoor rated, and weatherproof, like to the GNS-1141, nonetheless, if you only crave a only wireless connection to span your ii remote locations, and exercise not require high throughput, the GNS-1162N will work great in your situation.  The connectedness volition avoid other 2.4GHz frequencies and provide the faster, cheapest wireless bridge solution.  Using the wireless due north bridge, will allow you to connect the 2 locations similar to having an invisible Ethernet cablevision connected between your buildings.

—————————————————————————————————–
QUESTION3:

Hello, my dad has DSL at his habitation, I’thou 500 ft. farther off the road and can’t get the DSL  however. We want to be able to pick up wireless from my firm, the line of sight is pretty well articulate what would be the best & cheapest wireless bridge to do this?
Thank you.

ANSWER3:
If you are 500ft. away from your fathers Internet connexion, you have 2 options.  The kickoff would exist to utilise a inexpensive wireless span, such as the GNS-1151N.  This will include a complete wireless bridge setup, that ships pre-configured and tin fifty-fifty be used for long distance wireless bridging up to 1/2 mile.  It includes everything you lot need for “out of the box” operation.

Popular:   Canon M50 Vs Olympus Omd M10 Mark Iii

Another option, and one that may be a bit more price constructive, is to create a betoken to indicate wireless link between your ii locations using a cheap wireless span, such as the GNS-1172N, which means having an antenna on each end, pointing toward each other.  The antenna on his home connects to the wireless routers LAN port, and the antenna on your home connects to your PC’s LAN port, or even to some other indoor wireless router (WAN port).  This will requite you lot a quality indicate between the ii, and a solid connexion.  The radios will be mounted outdoors, and but a single cat5 cablevision will be required to provide data and ability, which simplifies the installation.  The antennas included in this wireless to wired bridge are very modest, only well-nigh 3″x4″.  They are outdoor rated, and weatherproof.  A solution such as this ane would exist much more reliable then the older linksys wireless ethernet bridges.  A linksys router, or cisco wireless router can be used on either cease (non included).  The exact router you choose is completely user preference.  For more than information on increasing your wireless range indoors, using wireless routers, and range extenders, or mesh networks, click here.

—————————————————————————————————–
QUESTION4:

Hi, I accept been searching for a wireless bridge connectedness to transfer information from an IP camera at a remote location, and span the video to our home network.  Your device GNS-1172N, 5GHz Wireless N Bridge, is the but device so far that meets all my requirements (since it has a very loftier information charge per unit, it is minor in size, with minimal setup and works in -40 °C weather condition which is very of import since the camera will be located in the far n of Canada). I was wondering if this cheap wireless bridge volition include everything I demand to connect my two locations, which are about 250ft. apart?  I hope you are having a great 24-hour interval.  Cheers

ANSWER4:
For a distance of 250ft., and with only 1 or 2 IP cameras transmitting video across the wireless link, aye the GNS-1172N would be your best wireless bridge to utilize for this application.  Considering  your distance is very short, y’all practice not require a long distance wireless bridge to connect the two locations, and considering you are not transmitting a large amount of data, you will non need a very high throughput wireless bridge.  The GNS-1172N is pre-configured for “out of the box” installation, equally in that location is no setup required to get this bridge wireless up and running.  Setting up a wireless span such as the GNS-1172N requires pointing the antennas at each other, connecting power to the included POE injectors, and using the external LED’s for alignment.  You will accept the choice to utilise whatever wireless northward router at the remote location, such as any linksys router, or Ubiquiti router for local WiFi access.  Yous tin likewise connect a switch at the remote location if you have more than then ane IP photographic camera continued at in one case.  Items are in stock.  Order online, or give united states of america a call if you have whatever other questions.

—————————————————————————————————–
QUESTION5:

What is the best wireless bridge for ane/ii mile, clear unobstructed line of sight?  We are trying to ship 4x, 3MP, PTZ cameras from a remote barn, to our abode, in order to view live video across the wireless.

ANSWER5:
Hi, the best wireless bridge for 1/2 mile, line of sight, would be either the GNS-1151N or the GNS-1155.  The GNS-1151N would support the 4 cameras, all the same the exact speed that you get across the link will depend on what you fix the FPS to be.  With a total 30FPS, and four PTZ cameras, you may experience some slight lag across the connection, however it volition notwithstanding work flawlessly.  If you lot want to be able to view all 4 cameras at the same time, with total 30FPS and live view, and then I suggest upgrading to the more commercial grade, full duplex, GNS-1155.  This will forbid any lag, and you have no latency across the link.  Both items are in stock, and both wireless n bridges transport pre-configured.    The GNS-1155 is a long distance wireless n bridge.  The GNS-1151N is a wireless Northward span that replaces the linksys wireless Ethernet span.  Both wireless n bridges tin connect to your existing linksys router, or linksys e3000 router.  The divergence betwixt a admission point vs router, is that the router has 4 LAN ports on the back, handles DHCP and has firewall security settings.  An access point is strickly a wireless node, which extends the range of your wireless network, wireless booster, wifi booster, or wifi extender.

Source: https://www.gnswireless.com/info/point-to-point-wireless-ptp