How To: Restore Cabinet Finishes
Your kitchen gets a lot of use. So it doesn’t take long to begin seeing signs of wear and tear on wood cabinets. Soon you may determine that some changes or updates are needed. And sometimes the simplest remedies are the best—and the nigh budget-friendly, too.
If your stained or painted kitchen cabinets are in need of a facelift, you can give them a fresh new appearance with only a minimal investment in tools and materials.
Restoring Cabinets with Stain
If your stained cabinets are nevertheless serviceable only take worn-out surfaces, or if yous decide on a different wait, then applying a new stain is like shooting fish in a barrel.
If you like a darker tone:
Start make clean your cabinets with a mix of TSP and h2o. Once they’re dry, sand the cabinets lightly and use a tack cloth to remove grit. Then apply a polyurethane varnish (tinted to whatever tone y’all notice appealing). This varnish-stain combo is likely to do the job in one awarding.
If you like a lighter tone:
Remove as much of the former stain as possible with pigment remover or, if necessary, chlorine bleach (or an ambitious stripper). Opt for elbow grease and a scraper if your cabinet doors characteristic crevices or contours. Before sanding to create a smooth surface, take the opportunity to apply wood filler to any dents, cracks, or deep scratches. After applying the stain you’ve selected, let it dry before adding a coat of protective wood sealer. Rub surfaces dry with 000 steel wool and clean with a tack cloth.
Restoring Cabinets with Paint
Just as you tin can restore cabinets with stain finishes that have tired out, you can also restore cabinets whose painted surfaces accept seen better days.
- Remove as much of the onetime end as possible with a pigment stripper. Then employ a precipitous scraper, where needed, to remove all traces of the one-time finish.
- Next, use wood filler to repair whatever dents, scratches, or other forms of surface harm.
- When newly smoothed surfaces are dry, finish off with sandpaper—100 grit, then 180 grit, and finally, 220-grit.
- Paint in any color yous like; before applying sealer, make clean surfaces with a tack cloth.
- When the sealer dries, rub surfaces lightly with 000 steel wool and use tack material to remove residual dust.