2002 Toyota Tacoma Upper Control Arms

By | August 31, 2022

CAMBURG UNIBALL UPPER Command ARM SET FOR 1996-2002 TOYOTA 4RUNNER AND 1995-2004 TOYOTA TACOMA (3100

CAMBURG UNIBALL UPPER Command ARM Set FOR 1996-2002 TOYOTA 4RUNNER AND 1995-2004 TOYOTA TACOMA (310005)

An excellent addition to the suspension, mainly designed to compliment racing style coil-over front shocks such every bit Icon, King, Fox etc. These arms will give you smoother joint and travel besides as greater suspension stability and strength. They as well provide more than clearance for larger tires (by increasing space betwixt the back of the tire and the upper command arm) and eliminate scroll to knuckle interference on full droop. These arms utilise 1″ spherical uni-brawl joints for the upper ball joint, polyurethane bushings and high forcefulness machined hardware.The frame pivot points are zirk equipped for lubrication. They add strength and wheel travel for loftier off-road demands. Looks abrupt, too!

These artillery right the interruption geometry by increasing much needed caster and permit for a wider range of alignment adjustment. The tubular construction besides gives yous more than tire & stupor clearance compared to the stock stamped arm. These arms are fully rebuildable, and may need that service occasionally depending on severity of use.

When lifting your truck, the stock upper arms become the limiting factor and hold back your suspensions performance. Our Camburg upper control arms address these issues and more. Replacing the stock brawl-joint with a uni-ball bearing we’re able to gain bicycle travel with a role that is considerably stronger and will last longer under extreme conditions. We build more than caster and modify the slant curve to correct geometry and then the vehicle aligns correctly and improves driving characteristics and handling.

Popular:   2000 Jeep Grand Cherokee Laredo Rear Bumper

We accept rebuild kits and uniballs available separately.


⚠
Alarm

Cancer and Reproductive Damage – www.P65Warnings.ca.gov

DETAILS

  • Increases usable bike travel
  • Corrects camber and castor
  • Eliminates weak factory joints
  • FK one” lined Uniballs
  • Oestrus-treated SS uniball spacers
  • ane.25″ 4130 Chromoly Tubing
  • Energy Suspension polyurethane bushings with thick inner sleeves
  • Wheel Size: sixteen×8 or 17×eight
  • Max Backspacing: iv.50in
  • Tire Size: 285/75/xvi or 285/70/17
  • Made in the USA

INCLUDES

  • (two) Upper Arms
  • Hardware Kit

TECHNICAL SPECIFICATIONS

  • Track Width: Stock
  • Wheel Size: 16×8 or 17×8
  • Max Backspacing: 4.55 in
  • Tire Size: 285/75/16 or 285/70/17

  • 1995-2004 Toyota Tacoma
  • 1996-2002 Toyota 4Runner

Source: https://wheelersoffroad.com/camburg-uniball-upper-control-arm-set-for-1996-2002-toyota-4runner-and-1995-2004-toyota-tacoma-310005.html